# Roshera blog

- [When a seam is not an edge](https://roshera.tech/blog/when-a-seam-is-not-an-edge.md) (2026-11-19): A profile sampled into 160 facets drew 160 lines across the part. Here is the rule that keeps a faceted surface's outline and drops its seams.
- [The part that vanished on reopen](https://roshera.tech/blog/the-part-that-vanished-on-reopen.md) (2026-11-19): An agent built a wing rib; after a reload the document came back without it. The cause was two sequence counters in one history, and the fix is a lesson about event-sourced CAD.
- [An aerofoil is stated by its ordinates](https://roshera.tech/blog/an-aerofoil-is-stated-by-its-ordinates.md) (2026-11-19): A chord and a depth do not let a machinist make an aerofoil. Roshera now measures the profile's ordinates from the solid and puts them on the sheet, certified.
- [A DXF that opens right in other CAD tools](https://roshera.tech/blog/a-dxf-that-opens-right-in-other-cad-tools.md) (2026-11-18): Millimetres that read as inches, circles as polygons, a white sheet, 3,600 objects. What it took to make a drawing's DXF open properly elsewhere.
- [A drawing that checks its own numbers](https://roshera.tech/blog/a-drawing-that-checks-its-own-numbers.md) (2026-11-17): Every value on a Roshera sheet is re-measured against the solid. Here is what the sheet certificate checks, and what it refuses.
